江汉大学学报（自然科学版）

参考文献

[1]Troitskii O A.Pressure shaping by the application of a high energy[J].Material Science and Engineering,1985,75A(1):37-50.

[2]Okazaki K,Kagama M,Conrad H.An evaluation of the contributions of skin,pinchand heating effects to the electroplastic effect in titanium[J].Materials Science and Engineering,1990,45(10):109-116.

[3]Parkansky K,Molotsky N,Rosenberg V,et al.Low current electroplastic effect in ferromagnetic materials[J].Journal of Applied Physics,2001,89(10):5597-5602.

[4]Conrad H,Sprecher A F,Cao W D,et al.Electroplastic ty the effect of electricity on the mechanical properties of metal[J].JOM,1990,9(2):28-33.

[5]Hong G G,Xia T F.Optimization of replacement scheme of soft rock mass at large cavern group using evolutionary finite element method[J].Intelligent Rock Mechanics and Rock Engineering,2001,9(4):377-379.

[6]Tang G Y,Zhang M X,Zhang J,et al.Experimental study of electroplastic effect on stainless-steel wire 304L[J].Materials Science and Engineering A-Struc tural Materials Properties Microstructure and Process ing,2000,281(2):263-267.

[7]Xu Z H,Tang G Y,Shao Q,et al.Research of electro plastic rolling of AZ31Mg alloy strip[J].Journal of Ma terials Processing Technology,2007,182:128-133.

[8]Jiang Y B,Tang G Y,Xu Z H,et al.Effect of electro pulsing treatment on microstructure and tensile fracture behavior of aged Mg-9Al-1Zn alloy strip[J].Applied Physics,2009,97:607-615.

[9]Lefik M,Schrefler B A.Atificial neural-network as an incremental nonlinear constitutive model for a finite-el ement code[J].Computer Methods in Applied Mechan ics and Engineering,2008,192:3265-3283.

[10]Huang Y,Blackwell P L.Prediction of mechani cal-properties of superplastic lnconel-asterisk-718us ing artificial neural networks[J].Materials Science and Technology,2009,18:1104-1108.

[11]Trubitsyna I B,Prokoshkin S D,Korotitskii A V,et al.Structure formation in Ti-Ni alloys after intensive plas tic and electroplastic deformation[J].Zh Funkts Mater,2007,1(2):66-71.

[12]Stolyarov V V.Deformability and nanostructuring of Ti Ni shape-memory alloys during electroplastic rolling[J].Materials Science and Engineering:A,2009,503:1-2,18-20.

[13]Jiang Y,Tang G,Shek C,et al.Effect of electropulsing treatment on microstructure and tensile fracture behav ior of aged Mg-9Al-1Zn alloy strip[J].Applied Phys ics A:Materials Science&Processing,2009,97(3):607-615.

[14]田昊洋,唐国翌,徐卓辉,等.镁合金的电致塑性拉拔研究[J].有色金属,2007,59(2):10-13.

[15]Stolyarov V V.Electroplastic effect in nanostructures ti tanium alloys[J].Rev Adv Mater Sci,2012,3:163-166.

[16]Troitskii O A.Effect of the electron state of a metal on its mechanical properties and the phenomenon of elec troplasticity[J].Problemy Prochnosti,1977,3(9):38-46.

[17]Conrad H.Thermally activated deformation of metals[J].Journal of Metals,1964,7(3):582-588.

[18]Troitskii O A,Moiseenko M M.Electroplastic deformation of zinc,cadmium,and lead crystals[J].Russian Metallurgy,1987,11(25):159-161.

[19]李尧,董晓华.Zn-22%Al合金电致塑性效应中位错激活的动力学分析[J].江汉大学学报:自然科学版,2007,35(3):39-41.

[20]Gallo F,Satapathy S,Ravi-Chandar K.Plastic deforma tion in electrical conductors subjected to short-duration current pulses[J].Mechanics of Materials,2012,55(12):146-162.

[21]刘渤然,赖祖涵,张彩培.冷轧态Al-Li-Cu-Mg-Zr合金在脉冲电流作用下超塑性形变中的位错形态[J].材料研究学报,2000,14(2):218-223.

[22]Prokoshkin S D,Korotitskiy A V,Brailovski V,et al.Effect of nanocrystalline structure and polygonized dis location substructure on Ti-Ni martensite lattice param eters and transformation lattice strain[J].Mater Sci Fo rum,2008,175(48):584-586.

[23]王敏,蔺成效.Ti-6Al-4V合金超塑性变形时的组织演化[J].稀有金属材料与工程,2012,41(7):1176-1180.

[24]Wen P S,Jiang K,Chen R.Mechanism research and progress of metal's pure electroplastic effect[J].Nature Nanotechnology,2012,6(184):1060-1063.

[25]Silveira V L A,Porto M F S.Electroplastic effect in cop per subjected to low density electric current[J].Scripta Metal,1981,15(8):945-950.

[26]Prokoshkin S D,Stolyarov V V,Korotitskii A V,et al.Investigation of the influence of the parameters of pulsed electric action upon deformation on the structure and functional properties of a Ti-Ni alloy with a shape-memory effect[J].The Physics of Metals and Metallography,2009,108(6):616-624.

[27]林化强,赵洋,李丁园,等.脉冲电流对Ti-6Al-4V合金显微组织及力学性能的影响[J].吉林大学学报:工学版,2008,38(5):1060-1064.

[28]Molotskii M,Fleurov V.Magnetic effects in electroplas ticity of metals[J].Physical Review B,1995,52(22):15829-15834.

[29]刘兆龙,胡海云,范天佑.磁致塑性的位错机理[J].北京理工大学学报,2007,27(2):113-115.

[30]Hua J S,Zhang Y J,Wu C Y.Grain refinement of Sn-Pb alloy under a novel combined pulsed magnetic field during solidification[J].Journal of Materials Pro cessing Technology,2011,211:463-466.

[31]Stolyarov V V,Ugurchiev U Kh,Trubitsyna I B,et al.Intensive electroplastic deformation of the TiNi alloy[J].Fiz Tekh Vys Dav,2008,16(4):48-51.

[32]唐国翌,姜雁斌,崔敬.电致塑性拉拔及电致塑性处理技术的应用[J].冶金设备,2008,46(3):63-66.

[33]吴立鸿,王铁豹,王盼,等.Mg-7.0Al-0.4Zn镁合金超塑性变形中的EBSD研究[J].稀有金属材料及工程,2011,40(11):1887-1890.

[34]Liu Y,Wang L,Feng F.Effect of pulse current on ten sile deformation behavior of IN718alloy[J].Advanced Materials Research,2012,509(4):56-63.

[35]Tskhondiya G A,Beklemishev N N.Simulating the effect of a high density electric current pulse on the stress field during plastic deformation[J].Original Research,2012,5(3):157-162.

[36]Hanazaki K,Shigeiri N,Tsuji N.Change in microstruc tures and mechanical properties during deep wire draw ing of copper[J].Materials Science and Engineering:A,2010,527(21/22):5699-5707.

[37]唐国翌,徐卓辉,田绍权,等.变形镁合金薄板、带、线材的电致塑性轧制方法及装置:中国,1891363[P].2007-01-10.

[38]Yu W P,Qin R S,Wu K M.The Effect of hot-and cold-rolling on the electropulse-induced microstruc ture and property changes in medium carbon low alloy steels[J].Steel Research,2012,5(12):1002-1006.

[39]Zhu R F,Tang G Y,Shi S Q,et al.Effect of electroplas tic rolling on the ductility and superelasticity of TiNi shape memory alloy[J].Materials and Design,2013,44(2):606-611.

[40]黄旺.电脉冲轧制装置及镁合金轧制工艺的初步研究[D].兰州:兰州理工大学,2010.